Road Rig GuidePlan a trip budget
Explore

Towing & payload check

Compare recorded loads with your own vehicle, trailer, hitch, and axle ratings.

Use actual labels, manuals, and measurements. This worksheet does not certify equipment safety.

Vehicle ratings

Trailer & hitch ratings

Actual travel-ready measurements

Payload bookkeeping

Reset

Collect the measurements first.

Blank fields have no assumed value. Enter zero for unused loads. The worked example below explains every input.

What this check can tell you

This worksheet subtracts recorded loads from the ratings you enter. It helps expose a mismatch that a single advertised towing figure can hide. It does not inspect your rig, determine compatibility, or declare a combination safe. The remaining checks include tire and wheel-position loading, each trailer axle, hitch installation, braking equipment, loading balance, and manufacturer operating instructions. A positive value is simply unused allowance against that particular entered rating.

Bring the labels and scale readings together before filling it out. Use the vehicle’s own GVWR, axle ratings, and payload allowance, plus the trailer limit for the exact vehicle configuration. Use the trailer’s GVWR and the lowest applicable gross and vertical ratings across the hitch components. Ford’s towing resources distinguish vehicle and equipment ratings; a high capacity printed on one component does not increase the rating of another component.

Keep the weighing configurations distinct

The front, rear, and trailer-axle inputs describe one complete, travel-ready, hitched weighing. Add those three readings for combined weight. Add only the front and rear readings for tow-vehicle weight in that hitched state. Do not then add tongue weight to either sum: the scale readings already include the load carried by the connected combination.

The whole loaded trailer and its tongue or pin measurement are separate inputs. Obtain them using an appropriate weighing procedure for your equipment; they are not inferred from a brochure’s empty weight. A weight-distribution system changes where load is carried, so do not assume the trailer axle reading from a distributed, hitched weighing equals whole trailer weight minus the independent tongue reading. The calculator deliberately does not force that equality.

Jayco’s 2026 towable manual discusses loaded weighing and individual wheel positions in its pre-travel section. A scale operator or qualified technician can help establish a consistent set of measurements. Do not stand in a hazardous location or improvise a weighing arrangement to obtain a number for this form.

The rating margins

The vehicle margin is GVWR minus measured front and rear axle loads. The combined margin is GCWR minus all three hitched axle-group readings. Each tow-vehicle axle margin uses its own rating and its own measured load. Trailer, hitch-gross, and vehicle-trailer-limit margins each subtract the independently measured whole trailer weight from the relevant rating. Vertical hitch margin subtracts the measured tongue or pin load from the lowest applicable vertical hitch rating.

Payload bookkeeping is separate: payload allowance minus passengers, added cargo/accessories, hitch equipment, and tongue or pin load. Include only items not already reflected in the allowance you are using. An accessory counted in both cargo and hitch mass would be counted twice. This bookkeeping does not replace actual axle measurements, especially with weight distribution. Do not use a favorable bookkeeping result to override an exceeded scale-based rating.

Work through an illustrative combination

Assume a vehicle GVWR of 7,200 lb, GCWR of 15,000 lb, payload allowance of 1,700 lb, and configuration-specific trailer limit of 8,000 lb. Assume front and rear axle ratings of 3,600 and 4,000 lb. Enter hitched scale readings of 3,000 lb front, 3,500 lb rear, and 5,100 lb at the trailer axle group. Vehicle weight is 6,500 lb and combined weight is 11,600 lb, leaving 700 lb and 3,400 lb against those two ratings.

For this example only, the independently measured whole trailer is 6,000 lb with 900 lb of tongue load. Trailer GVWR is 7,000 lb; the applicable hitch limits are 8,000 lb gross and 1,000 lb vertical. Those margins are 1,000 lb, 2,000 lb, and 100 lb respectively. The tongue proportion is 900 divided by 6,000, or 15%. That percentage is reported without classifying it as appropriate: the required range depends on the equipment and hitch arrangement.

Enter 400 lb of passengers, 200 lb of cargo, and 100 lb of hitch equipment. With the 900 lb tongue load, the payload bookkeeping consumes 1,600 lb of the example allowance, leaving 100 lb. These are invented values chosen to demonstrate the arithmetic, not a real scale ticket or an approved combination.

Read the result as a list of questions

Negative margins identify an exceeded entered rating. A zero margin leaves no allowance for measurement error or changes in load. Positive margins still depend on accurate readings and correct ratings. Recheck missing equipment limits, how each load was measured, and what changed since the weighing. Water, luggage, occupants, and hitch hardware can make old records unsuitable for today’s setup.

All fields use pounds. This tool does not convert kilograms, estimate empty vehicle weight, recommend hitch adjustments, or calculate tire pressure. Keep the result with the underlying records and take unresolved conflicts to the vehicle, trailer, and hitch manufacturers or a qualified RV professional. See the ratings guide and loaded-trailer guide for the distinctions behind the worksheet.